C2KGP Industrial Cable Gland
CMP C2KGP type brass indoor and outdoor cable gland for use with all types of Single Wire Armour (SWA), Wire Braid Armour, Strip Armour, Pliable Wire Armour & Steel Tape Armour (STA) cable, providing environmental seal on the cable outer sheath and additional deluge seal meeting the test requirements of DTS01:91.
All CMP Cable Glands are EMC Tested.
The cable gland also provides mechanical cable retention and electrical continuity via armour termination. A reversible armour cone and AnyWay universal clamping ring arrangement allows the cable to be easily disconnected from the equipment, for maintenance and change out etc. This feature also facilitates remote make off procedures when the termination is to be conducted in confined spaces or in areas of restricted access
The CMP C2KGP range of industrial cable glands is designed and tested to BS 6121:Part 1:1989, meets or surpasses the requirements of EN 50262:1999, and is produced from Brass grade CuZn39Pb3 (CW614N) to EN12168.
Cable Gland Selection Table
- View Metric Table
- View Imperial Table
| Cable Gland Size | Entry Threads Metric "C" |
Minimum Thread Length "E" | Cable Bedding Diameter "A" | Overall Cable Diameter "B" | Armour Range + | Across Flats "D" | Across Corners "D" | Protrusion Length "F" | Ordering Reference (Brass Metric) |
PVC Shroud Ref* | Cable Gland Weight (Kgs) | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max | Min | Max | Grooved Cone | Stepped Cone | Max | Max | |||||||||
| Min | Max | Min | Max | ||||||||||||
| 20S/16 | M20 | 10.0 | 8.7 | 6.1 | 11.5 | 0.0 | 1.0 | 0.9 | 1.0 | 24.0 | 25.9 | 47.0 | 20S16C2KGP1RA | PVC06 | 0.132 |
| 20S | M20 | 10.0 | 11.7 | 9.5 | 15.9 | 0.0 | 1.0 | 0.9 | 1.25 | 24.0 | 25.9 | 47.0 | 20SC2KGP1RA | PVC06 | 0.132 |
| 20 | M20 | 10.0 | 14.0 | 12.5 | 20.9 | 0.0 | 1.0 | 0.9 | 1.25 | 30.5 | 32.9 | 50.0 | 20C2KGP1RA | PVC06 | 0.194 |
| 25S | M25 | 10.0 | 20.0 | 14.0 | 22.0 | 0.0 | 1.0 | 1.25 | 1.6 | 36.0 | 38.9 | 55.0 | 25SC2KGP1RA | PVC09 | 0.306 |
| 25 | M25 | 10.0 | 20.0 | 18.2 | 26.2 | 0.0 | 1.0 | 1.25 | 1.6 | 36.0 | 38.9 | 55.0 | 25C2KGP1RA | PVC09 | 0.306 |
| 32 | M32 | 10.0 | 26.3 | 23.7 | 33.9 | 0.0 | 1.0 | 1.6 | 2.0 | 46.0 | 49.7 | 58.0 | 32C2KGP1RA | PVC11 | 0.468 |
| 40 | M40 | 10.0 | 32.2 | 27.9 | 40.4 | 0.0 | 1.0 | 1.6 | 2.0 | 55.0 | 59.4 | 58.0 | 40C2KGP1RA | PVC15 | 0.678 |
| 50S | M50 | 10.0 | 38.2 | 35.2 | 46.7 | 0.0 | 1.0 | 2.0 | 2.5 | 60.0 | 64.8 | 58.0 | 50SC2KGP1RA | PVC18 | 0.750 |
| 50 | M50 | 10.0 | 44.1 | 40.4 | 53.1 | 0.0 | 1.0 | 2.0 | 2.5 | 70.1 | 75.7 | 60.0 | 50C2KGP1RA | PVC21 | 1.044 |
| 63S | M63 | 10.0 | 50.0 | 45.6 | 59.4 | 0.0 | 1.0 | 2.0 | 2.5 | 75.0 | 81.0 | 70.0 | 63SC2KGP1RA | PVC23 | 1.074 |
| 63 | M63 | 10.0 | 56.0 | 54.6 | 65.9 | 0.0 | 1.0 | 2.0 | 2.5 | 80.0 | 86.4 | 70.0 | 63C2KGP1RA | PVC25 | 1.280 |
| 75S | M75 | 15.0 | 62.0 | 59.0 | 72.1 | 0.0 | 1.0 | 2.0 | 2.5 | 90.0 | 97.2 | 80.0 | 75SC2KGP1RA | PVC28 | 1.860 |
| 75 | M75 | 15.0 | 68.0 | 66.7 | 78.5 | 0.0 | 1.0 | 2.5 | 3.0 | 100.0 | 108.0 | 82.0 | 75C2KGP1RA | PVC30 | 2.550 |
| 90 | M90 | 15.0 | 80.0 | 76.2 | 90.4 | 0.0 | 1.6 | 3.0 | 3.5 | 115.0 | 124.2 | 96.0 | 90C2KGP1RA | PVC32 | 3.650 |
| 100 | M100 | 15.0 | 91.0 | 86.1 | 101.5 | 0.0 | 1.6 | 3.15 | 4.0 | 123.0 | 132.8 | 106.0 | 100C2KGP1RA | LSF33 | 4.200 |
| 115 | M115 | 15.0 | 98.0 | 101.5 | 110.3 | 0.0 | 1.6 | 3.15 | 4.0 | 133.4 | 144.1 | 115.0 | 115C2KGP1RA | LSF34 | 4.750 |
| 130 | M130 | 15.0 | 115.0 | 114.2 | 123.3 | 0.0 | 1.6 | 3.15 | 4.0 | 146.1 | 157.8 | 125.0 | 130C2KGP1RA | LSF35 | 5.330 |
| Dimensions are displayed in millimetres unless otherwise stated | |||||||||||||||
NOTE: *CMP SOLO LSF Halogen Free Shrouds also available on request. + Alternative armour clamping range available for non-standard armour sizes.
| Cable Gland Size | Entry Threads Metric "C" | Minimum Thread Length "E" | Cable Bedding Diameter "A" | Overall Cable Diameter "B" | Armour Range + | Across Flats "D" | Across Corners "D" | Protrusion Length "F" | Ordering Reference (Brass Metric) | PVC Shroud Ref* | Cable Gland Weight (Ozs) | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max | Min | Max | Grooved Cone | Stepped Cone | Max | Max | |||||||||
| Min | Max | Min | Max | ||||||||||||
| 20S/16 | M20 | 0.394 | 0.343 | 0.240 | 0.453 | 0.000 | 0.039 | 0.035 | 0.039 | 0.945 | 1.020 | 1.850 | 20S16C2KGP1RA | PVC06 | 4.66 |
| 20S | M20 | 0.394 | 0.461 | 0.374 | 0.626 | 0.000 | 0.039 | 0.035 | 0.049 | 0.945 | 1.020 | 1.850 | 20SC2KGP1RA | PVC06 | 4.66 |
| 20 | M20 | 0.394 | 0.551 | 0.492 | 0.823 | 0.000 | 0.039 | 0.035 | 0.049 | 1.201 | 1.295 | 1.969 | 20C2KGP1RA | PVC06 | 6.84 |
| 25S | M25 | 0.394 | 0.787 | 0.551 | 0.866 | 0.000 | 0.039 | 0.049 | 0.063 | 1.417 | 1.531 | 2.165 | 25SC2KGP1RA | PVC09 | 10.79 |
| 25 | M25 | 0.394 | 0.787 | 0.717 | 1.031 | 0.000 | 0.039 | 0.049 | 0.063 | 1.417 | 1.531 | 2.165 | 25C2KGP1RA | PVC09 | 10.79 |
| 32 | M32 | 0.394 | 1.035 | 0.933 | 1.335 | 0.000 | 0.039 | 0.063 | 0.079 | 1.811 | 1.957 | 2.283 | 32C2KGP1RA | PVC11 | 16.51 |
| 40 | M40 | 0.394 | 1.268 | 1.098 | 1.591 | 0.000 | 0.039 | 0.063 | 0.079 | 2.165 | 2.339 | 2.283 | 40C2KGP1RA | PVC15 | 23.92 |
| 50S | M50 | 0.394 | 1.504 | 1.386 | 1.839 | 0.000 | 0.039 | 0.079 | 0.098 | 2.362 | 2.551 | 2.283 | 50SC2KGP1RA | PVC18 | 26.46 |
| 50 | M50 | 0.394 | 1.736 | 1.591 | 2.091 | 0.000 | 0.039 | 0.079 | 0.098 | 2.760 | 2.980 | 2.362 | 50C2KGP1RA | PVC21 | 36.83 |
| 63S | M63 | 0.394 | 1.969 | 1.795 | 2.339 | 0.000 | 0.039 | 0.079 | 0.098 | 2.953 | 3.189 | 2.756 | 63SC2KGP1RA | PVC23 | 37.88 |
| 63 | M63 | 0.394 | 2.205 | 2.150 | 2.594 | 0.000 | 0.039 | 0.079 | 0.098 | 3.150 | 3.402 | 2.756 | 63C2KGP1RA | PVC25 | 45.15 |
| 75S | M75 | 0.591 | 2.441 | 2.323 | 2.839 | 0.000 | 0.039 | 0.079 | 0.098 | 3.543 | 3.827 | 3.150 | 75SC2KGP1RA | PVC28 | 65.61 |
| 75 | M75 | 0.591 | 2.677 | 2.626 | 3.091 | 0.000 | 0.039 | 0.098 | 0.118 | 3.937 | 4.252 | 3.228 | 75C2KGP1RA | PVC30 | 89.95 |
| 90 | M90 | 0.591 | 3.150 | 3.000 | 3.559 | 0.000 | 0.063 | 0.118 | 0.138 | 4.528 | 4.890 | 3.780 | 90C2KGP1RA | PVC32 | 128.75 |
| 100 | M100 | 0.591 | 3.583 | 3.390 | 3.996 | 0.000 | 0.063 | 0.124 | 0.157 | 4.843 | 5.228 | 4.173 | 100C2KGP1RA | LSF33 | 148.15 |
| 115 | M115 | 0.591 | 3.858 | 3.996 | 4.343 | 0.000 | 0.063 | 0.124 | 0.157 | 5.252 | 5.673 | 4.528 | 115C2KGP1RA | LSF34 | 167.55 |
| 130 | M130 | 0.591 | 4.528 | 4.496 | 4.854 | 0.000 | 0.063 | 0.124 | 0.157 | 5.752 | 6.213 | 4.921 | 130C2KGP1RA | LSF35 | 188.01 |
| Dimensions are displayed in inches unless otherwise stated | |||||||||||||||
NOTE: *CMP SOLO LSF Halogen Free Shrouds also available on request. + Alternative armour clamping range available for non-standard armour sizes.
| TECHNICAL DATA | ||||
|
|
||||
| GOST R Certificate Number | POCC GB.06.H00187 |
| GOST GGTN Permit | PPC 00-40706 |
| GOST K Certificate Number | KZ 75000361 01 01 14761 |
| RoK Permit For Use Number | 19-02-UL-1957 |
| Type | C2KGP |
| Design Specification | BS 6121 : Part 1: 2005, EN 50262:1999 |
| Continuous Operating Temperature | -60°C to +150°C |
| Ingress Protection Rating | IP66, IP67, IP68 |
| Ingress Protection Document | 5046 C549H |
| Deluge Protection Compliance | DTS01 : 91 |
| Deluge Protection Document | 5046 C549H-D |
| Cable Gland Material | Brass, Electroless Nickel Plated Brass, Stainless Steel, Aluminium |
| Seal Material | CMP Formulated Thermoplastic Elastomer |
| Cable Type | Single Wire Armour (SWA), Aluminium Wire Armour (AWA), Steel Tape Armour (STA), Aluminium Strip Armour (ASA), Wire Braid Armour, Screened Flexible Wire Braid (e.g. CY / SY), Pliable Wire Armour (PWA) |
| Armour Clamping | Reversible Armour Cone & AnyWay Universal Clamping Ring |
| Sealing Technique | Unique CMP "LRS" TM Outer Seal (Load Retention Seal) |
| Sealing Area(s) | Cable Outer Sheath |
| Accessories | Adaptor/Reducer, Earth Tag, Locknut, Serrated Washer, Entry Thread Seal, Shroud |
Additional information
